Alpha PCB
₹600.00 (Inc. GST)PCB and joint plate for the Alpha. Source files available here. Details: 1.6mm TG130-140 FR4, Yellow soldermask, white silkscreen, HASL-LF Finish.
Showing 13–24 of 64 results
PCB and joint plate for the Alpha. Source files available here. Details: 1.6mm TG130-140 FR4, Yellow soldermask, white silkscreen, HASL-LF Finish.
Device Core:AVR Operating Frequency Max:20MHz Program Memory Size:32KB No. of Pins:28Pins IC Case / Package:DIP No. of I/O’s:23I/O’s Interfaces:I2C, SPI, UART RAM Memory Size:2KB ADC Channels:6Channels ADC Resolution:10Bit Supply Voltage Min:1.8V Supply Voltage Max:5.5V Operating Temperature Min:-40°C Operating Temperature Max:85°C IC Mounting:Through Hole MCU Family:AVR ATmega MCU Series:ATmega328
The Bakeneko60 v3 made out of Polycarbonate. Available as a case only, or as a kit. Contents: Case Only – A Bakeneko60 v3 case machined out of polycarbonate Kit – Bakeneko60 v3 case machined out of polycarbonate Glowie60 PCB (fixed layout hotswap PCB with underglow) FR4 Plate with support for screw in stabilizers Red 50A…
Kit includes 2x PCBs 2x Switch Plates 2x Bottom Plates
Gasket strip made of Poron LE-20 with backing. 2mm * 5mm * 90mm.
Hotswap sockets for Cherry MX-compatible switches, by Gateron. Works for up to 50,000 cycles. NB: Gateron hotswap sockets must be used with PCBs specifically designed for hotswap sockets from Gateron or any other compatible brand like Kailh or TTC.
Material Silicone Durometer(Hardness) 50A AS568 number(Dash #) 262 CS(Thickness) 3.53mm ID(Inner Diameter) 177.39mm OD(Outer Diameter) 184.45mm
Frequency Nom:16MHz Crystal Case:Through Hole, 10.77mm x 4.34mm Frequency Stability + / –:50ppm Load Capacitance:18pF Frequency Tolerance + / –:30ppm Product Range:HC49 Operating Temperature Min:-40°C Operating Temperature Max:85°C
Connector Systems:Wire-to-Board Pitch Spacing:1mm No. of Rows:1Rows No. of Contacts:4Contacts Contact Termination Type:Surface Mount Right Angle Product Range:SH Connector Shroud:Shrouded Contact Material:Copper Alloy Contact Plating:Tin Plated Contacts
Material: PORON
Function: Could be glued to the PCB( it has glue on the back), used to buffer the force between switches and PCB, the typing sound would be modified
Versions:
1. Hot-swap version (Both 3pins and 5pins switches can be used, RGB LED also has a hole, which would not affect the light)
2. Solder version (Both 3pins and 5pins switches can be used)
Size:
1. Hot-swap version: 15.3*14.5mm
2. Solder version: 16.5*14.5mm
Thickness: 0.5mm
Amount: 120 pieces per pack
Weight: 18g
End of content
End of content