-
₹799.00 (Inc. GST)
Akko x MonsGeek acrylic 16-key switch tester. We selected a wide range of different switches from 3 different brands for users to test at minimal cost. Be aware! Some switches may come in different versions in different batches. [Linear Switches] Akko CS Wine Red Akko CS Matcha Green Akko V3 Cream Yellow Akko CS Crystal…
-
₹350.00 (Inc. GST)
Gasket strip made of Poron LE-20 with backing. 2mm * 5mm * 90mm.
-
₹10.00 (Inc. GST)
Hotswap sockets for Cherry MX-compatible switches, by Gateron. Works for up to 50,000 cycles. NB: Gateron hotswap sockets must be used with PCBs specifically designed for hotswap sockets from Gateron or any other compatible brand like Kailh or TTC.
-
₹530.00 (Inc. GST)
Material: PORON
Function: Could be glued to the PCB( it has glue on the back), used to buffer the force between switches and PCB, the typing sound would be modified
Versions:
1. Hot-swap version (Both 3pins and 5pins switches can be used, RGB LED also has a hole, which would not affect the light)
2. Solder version (Both 3pins and 5pins switches can be used)
Size:
1. Hot-swap version: 15.3*14.5mm
2. Solder version: 16.5*14.5mm
Thickness: 0.5mm
Amount: 120 pieces per pack
Weight: 18g
-
₹1,500.00 (Inc. GST)
- 120pcs per pack
- 3.5mm thickness
-
₹360.00 (Inc. GST)
- Tactile version
- Only compatible with Cherry MX Low Profile footprint
- NOT compatible with TTC Hotswap sockets
- NOT compatible with Choc footprint
-
₹360.00 (Inc. GST)
- Linear version
- Only compatible with Cherry MX Low Profile footprint
- NOT compatible with TTC Hotswap sockets
- NOT compatible with Choc footprint
-
₹899.00 (Inc. GST)
Compatible with TOFU65 case and TADA68 aluminum case. Thickness: 2mm Material: PORON
-
₹10.00 (Inc. GST)
The very best hotswap sockets for hotswap PCB designs, now made even better with increased durability!
-
From ₹9.50 to ₹13.00 (Inc. GST)
Make (almost) any PCB hotswappable! These Mill-max 0305 sockets can be soldered in place through holes for most Cherry MX switches, and make (almost) any PCB hotswappable. Perfect if you want to prototype, but aren’t sure which switch is perfect, or if you just want to make your keyboard hotswap. You need 2 sockets for…
End of content
End of content