Showing 13–24 of 74 results
-
Sale!
₹8,999.00 ₹5,999.00 (Inc. GST)
The Bakeneko60 v3 made out of Polycarbonate. Available as a case only, or as a kit. Contents: Case Only – A Bakeneko60 v3 case machined out of polycarbonate Kit – Bakeneko60 v3 case machined out of polycarbonate Glowie60 PCB (fixed layout hotswap PCB with underglow) FR4 Plate with support for screw in stabilizers Red 50A…
-
Sale!
₹640.00 ₹300.00 (Inc. GST)
- 5-Pin (PCB Mount)
- Transparent Housing
- 62G Spring Weight
- PC Top Housing
- Nylon PA Bottom Housing
- Pre-Lubed
- Linear Feedback
- Silent bottoming out
-
₹1,500.00 (Inc. GST)
Kit includes 2x PCBs 2x Switch Plates 2x Bottom Plates
-
₹350.00 (Inc. GST)
Gasket strip made of Poron LE-20 with backing. 2mm * 5mm * 90mm.
-
₹10.00 (Inc. GST)
Hotswap sockets for Cherry MX-compatible switches, by Gateron. Works for up to 50,000 cycles. NB: Gateron hotswap sockets must be used with PCBs specifically designed for hotswap sockets from Gateron or any other compatible brand like Kailh or TTC.
-
₹300.00 (Inc. GST)
Material Silicone Durometer(Hardness) 50A AS568 number(Dash #) 262 CS(Thickness) 3.53mm ID(Inner Diameter) 177.39mm OD(Outer Diameter) 184.45mm
-
₹100.00 (Inc. GST)
Frequency Nom:16MHz Crystal Case:Through Hole, 10.77mm x 4.34mm Frequency Stability + / –:50ppm Load Capacitance:18pF Frequency Tolerance + / –:30ppm Product Range:HC49 Operating Temperature Min:-40°C Operating Temperature Max:85°C
-
₹70.00 (Inc. GST)
Connector Systems:Wire-to-Board Pitch Spacing:1mm No. of Rows:1Rows No. of Contacts:4Contacts Contact Termination Type:Surface Mount Right Angle Product Range:SH Connector Shroud:Shrouded Contact Material:Copper Alloy Contact Plating:Tin Plated Contacts
-
₹530.00 (Inc. GST)
Material: PORON
Function: Could be glued to the PCB( it has glue on the back), used to buffer the force between switches and PCB, the typing sound would be modified
Versions:
1. Hot-swap version (Both 3pins and 5pins switches can be used, RGB LED also has a hole, which would not affect the light)
2. Solder version (Both 3pins and 5pins switches can be used)
Size:
1. Hot-swap version: 15.3*14.5mm
2. Solder version: 16.5*14.5mm
Thickness: 0.5mm
Amount: 120 pieces per pack
Weight: 18g
-
₹1,500.00 (Inc. GST)
- 120pcs per pack
- 3.5mm thickness
-
₹1,850.00 (Inc. GST)
PCBs for the Kolibri v0.1. Blue with HASL-LF finish. Source files available here: https://github.com/kreme123/Kolibri This set contains the PCB and Plate.
End of content
End of content