Showing 1–12 of 13 results
-
₹2,400.00 (Inc. GST)
AEBoards Staebies V2.1 The second version of the venerable AEBoards Staebies designed by Zambumon are improved based on customer feedback from the V1 production run. Each pack contains: 12 stems 12 housings 5 2U wires 1 6.25U wire 1 7U wire rubber o-rings screws Specifications: Wires, screws and nuts are black chrome Stems – POM…
-
₹799.00 (Inc. GST)
Akko x MonsGeek acrylic 16-key switch tester. We selected a wide range of different switches from 3 different brands for users to test at minimal cost. Be aware! Some switches may come in different versions in different batches. [Linear Switches] Akko CS Wine Red Akko CS Matcha Green Akko V3 Cream Yellow Akko CS Crystal…
-
₹350.00 (Inc. GST)
Gasket strip made of Poron LE-20 with backing. 2mm * 5mm * 90mm.
-
₹530.00 (Inc. GST)
Material: PORON
Function: Could be glued to the PCB( it has glue on the back), used to buffer the force between switches and PCB, the typing sound would be modified
Versions:
1. Hot-swap version (Both 3pins and 5pins switches can be used, RGB LED also has a hole, which would not affect the light)
2. Solder version (Both 3pins and 5pins switches can be used)
Size:
1. Hot-swap version: 15.3*14.5mm
2. Solder version: 16.5*14.5mm
Thickness: 0.5mm
Amount: 120 pieces per pack
Weight: 18g
-
₹1,500.00 (Inc. GST)
- 120pcs per pack
- 3.5mm thickness
-
₹360.00 (Inc. GST)
- Tactile version
- Only compatible with Cherry MX Low Profile footprint
- NOT compatible with TTC Hotswap sockets
- NOT compatible with Choc footprint
-
₹360.00 (Inc. GST)
- Linear version
- Only compatible with Cherry MX Low Profile footprint
- NOT compatible with TTC Hotswap sockets
- NOT compatible with Choc footprint
-
₹899.00 (Inc. GST)
Compatible with TOFU65 case and TADA68 aluminum case. Thickness: 2mm Material: PORON
-
₹100.00 (Inc. GST)
2U Cherry MX plate mount stabilizers.
-
₹335.00 – ₹2,365.00 (Inc. GST)
Durock Screw-In Stabilisers come pre-clipped nylon housings and gold-plated wires.
-
₹1,595.00 – ₹2,365.00 (Inc. GST)
Durock Smokey Screw-in Stabilisers are pre-clipped stabilizers made with new molds that prevent wire drop out. The housing and stem are made from Nylon and the wire from gold plated Stainless Steel.
End of content
End of content