Alpha PCB
₹600.00 (Inc. GST)PCB and joint plate for the Alpha. Source files available here. Details: 1.6mm TG130-140 FR4, Yellow soldermask, white silkscreen, HASL-LF Finish.
Showing 13–24 of 76 results
PCB and joint plate for the Alpha. Source files available here. Details: 1.6mm TG130-140 FR4, Yellow soldermask, white silkscreen, HASL-LF Finish.
Device Core:AVR Operating Frequency Max:20MHz Program Memory Size:32KB No. of Pins:28Pins IC Case / Package:DIP No. of I/O’s:23I/O’s Interfaces:I2C, SPI, UART RAM Memory Size:2KB ADC Channels:6Channels ADC Resolution:10Bit Supply Voltage Min:1.8V Supply Voltage Max:5.5V Operating Temperature Min:-40°C Operating Temperature Max:85°C IC Mounting:Through Hole MCU Family:AVR ATmega MCU Series:ATmega328
The Bakeneko60 v3 made out of Polycarbonate. Available as a case only, or as a kit. Contents: Case Only – A Bakeneko60 v3 case machined out of polycarbonate Kit – Bakeneko60 v3 case machined out of polycarbonate Glowie60 PCB (fixed layout hotswap PCB with underglow) FR4 Plate with support for screw in stabilizers Red 50A…
Cherry MX Clear – Brand: Cherry – Mounting Type: PCB Mounted – Durability: > 50 Million Actuations – Actuator Travel: 4 – 0.5 mm – Pretravel: 2 ± 0.6 mm – Initia lForce: 40 ± 15 cN – Actuation Force: 55 ± 20 cN – Pressure Point Force: 65 ± 20 cN – Switch Type: Tactile Bump – Material: Plastic
The Durock Medium Tactile Switch is highly recommended for anyone looking for a balanced tactile experience that is well-rounded, and not sharp like the T1s and Koalas. With a 65g bottoming out force they are comfortable to use in long sessions.
Kit includes 2x PCBs 2x Switch Plates 2x Bottom Plates
Gasket strip made of Poron LE-20 with backing. 2mm * 5mm * 90mm.
Hotswap sockets for Cherry MX-compatible switches, by Gateron. Works for up to 50,000 cycles. NB: Gateron hotswap sockets must be used with PCBs specifically designed for hotswap sockets from Gateron or any other compatible brand like Kailh or TTC.
Gateron Factory-Lubed Switches; 45 pcs in a box. Type: Tactile End Force: 45gf ± 15gf Total Travel: 4.0 – 0.4mm Pre-Travel: 2.0 ± 0.6mm Tactile Position:1.25mm Tactile Force: 55gf ±15gf
Material Silicone Durometer(Hardness) 50A AS568 number(Dash #) 262 CS(Thickness) 3.53mm ID(Inner Diameter) 177.39mm OD(Outer Diameter) 184.45mm
Frequency Nom:16MHz Crystal Case:Through Hole, 10.77mm x 4.34mm Frequency Stability + / –:50ppm Load Capacitance:18pF Frequency Tolerance + / –:30ppm Product Range:HC49 Operating Temperature Min:-40°C Operating Temperature Max:85°C
End of content
End of content